Home > Clear

TCXT Permanent magnet cylinder

Hot product

Solutions

Sales Hotline: +8613419860671

Product Introduction Submit request

Product Introduction

Email:
info@hengfujixie.com

Whatsapp/Wechat:
+86 13419860671
The TCXT series permanent magnet cylinder is a simple structure convenient operation no power consumption flexible installation reliable operation and permanent use of magnetic force. It is currently an ideal iron removal equipment.
Permanent magnet cylinder is a kind of permanent magnet iron remover. It is mainly used to remove iron impurities in dry powder materials and granular materials. It is widely used in food processing grain processing feed processing and fine chemical industries. Due to the scientific design of the permanent magnet cylinder the iron removal effect is obvious and it is an earlier permanent magnet iron remover. The outer shell of the permanent magnet cylinder is made of stainless steel or carbon steel the surface of the magnetic core is stainless steel and the inside is a permanent magnet.
 
1. Purpose and characteristics
        TCXT series permanent magnet cylinders are mainly used to remove magnetic iron impurities such as screws bolts nuts washers iron filings and so on in materials.
        1. The use of new magnetic materials with a magnetic field strength greater than or equal to 3000GS is suitable for removing iron from various materials without power.
        2. The shell is made of stainless steel with closed magnetic performance flexible cleaning door and good overall strength performance.
        3. Flexible installation convenient operation and maintenance does not occupy space iron removal rate ≥99.5% and performance reaches the international advanced level.
 
2. Working principle
        The TCXT series permanent magnet cylinder is composed of an outer cylinder and a magnet. The cylinder body is connected to the conveying pipeline through upper and lower flanges. It itself constitutes a part of the pipeline. The magnet is installed in the center of the cylinder body and supported by the base On the door the magnet is separated from the material by the stainless steel cover and cover top. The material passes through the gap between the cylinder and the cover. Because the gap is full of magnetic field the magnetic metal mixed in the material is magnetized. In the process of falling it gradually slows down and is adsorbed to the surface of the cover. When cleaning the magnet you only need to open the barrel door turn the magnet out of the barrel and manually clean the iron debris on the surface.
 

Online demand



语言 Language